Add Hatch

When the Add Hatch command is selected in the Parametric Frame Builder Action list box, the settings group for that command displays directly to the right of the Action list box.

The Add Hatch command manages settings that add hatching to frame sections.

Setting	Description
Add Hatch command settings group	The following settings are available when the Add Hatch command is selected. ID — Sets the ID number of the pane for which hatching is being added. Outline — Adds a shape to the perimeter of the hatching when on. Threshold — Adds a threshold to the frame when on, and enables the following settings: Height – Sets the height of the threshold. Overhang – Sets a value for the overhang (a width increase to the frame on one side). Delta — Sets the distance between hatching lines. Angle — Sets the angle of the hatching lines.

Setting

Description

Add Hatch command settings group

The following settings are available when the Add Hatch command is selected.

ID — Sets the ID number of the pane for which hatching is being added.
Outline — Adds a shape to the perimeter of the hatching when on.
Threshold — Adds a threshold to the frame when on, and enables the following settings:
- Height – Sets the height of the threshold.
- Overhang – Sets a value for the overhang (a width increase to the frame on one side).
Delta — Sets the distance between hatching lines.
Angle — Sets the angle of the hatching lines.